Outputs:

• 4x relay (10 A, 250 VAC or 30 VDC); screw-terminal: 26..16 AWG (0,13..1,3 mm²)
• 4x SSR (100mA, 60 VDC); screw-terminal: 26..16 AWG (0,13..1,3 mm²)

Inputs:

• 4x digital input; screw-terminal: 26..16 AWG (0,13..1,3 mm²)

Interfaces:

• 1x RS232 / RS485 full-duplex/ RS485 half-duplex; screw-terminal: 26..16 AWG (0,13..1,3 mm²)
• 1x 1-wire (3,3 V); screw-terminal: 26..16 AWG (0,13..1,3 mm²)

Isolation:

• optical-galvanic for inputs, outputs and “RS”-interfaces

Connectivity:

• 1x USB2.0
• 1x HDMI
• 1x 10/100 Mbps ETH

Built-in functions:

• watchdog
• RTC
• temperature monitoring
• LED indicators for power and system states

Add-ons:

• ABUS expansion bus for various external modules

Operating environment:

• temperature: -25°.35°C; non-condensing environment

Enclosure:

• material: polycarbonate
• dimensions: 117 x 89 x 61 mm (L x W x H)

mounting:

• DIN mountable; width: 6U

Power supply:

• input voltage range: 2,7..3,3 VDC (nominal voltage: 3,3 VDC)

Temperature:

• typical measurement accuracy: ± 0,1°C (in between 20..60°C), ± 0,2°C
• measurement range: -40°C..85°C, recommended measurement range*: 5°C..60°C

Relative humidity:

• typical measurement accuracy: ± 1,5% RH
• measurement range: 0%..100% RH, recommended measurement range*: 20%..80% RH

Operating conditions:

• temperature: -40°C..85°C
• other requirements: operating in condensing and dusty environment is permitted; sensor must not be used in presence of volatile chemicals

Enclosure:

• material: aluminum
• color: white (powder coated) or black (anodized)
• external dimensions: 35 x 31 x 13 mm (H x W x D)

Connectivity:

• 0,5m cable output with RJ45 plug
• 1-wire communication protocol
• multiple sensors can be connected into single 1-wire network (to single controller)

Additional information:

• T-junctions are available for 1-wire network implementation
• for additional fee sensor can be certified/calibrated

* Long-term exposure to conditions outside normal range, especially at high humidity, may temporarily offset the RH signal. After returning into the normal temperature and humidity range the sensor will slowly come back to calibration state by itself.

Interfaces:

• 1x RS232; screw-terminal: 26..16 AWG (0,13..1,3 mm²)
• 1x RS485 half-duplex;screw-terminal: 26..16 AWG (0,13..1,3 mm²)
• 1x 1-wire (3,3V); screw-terminal: 26..16 AWG (0,13..1,3 mm²)
• 1x I2C (3,3V); screw-terminal: 26..16 AWG (0,13..1,3 mm²)

Connectivity:

• 1x USB2.0
• 1x HDMI
• 1x 10/100 Mbps ETH

Built-in functions:

• temperature, relative humidity and barometric pressure monitoring
• 3-axis accelerometer; measurement range: ±8g
• microSD memory card reader/writer
• watchdog
• RTC (real-time clock)
• LED indicators for power and system states

Operating environment:

• temperature: -25°.50°C; non-condensing environment

Enclosure:

• material: aluminum
• dimensions: 105 x 72 x 34 mm (L x W x H) – without terminals
• dimensions: 105 x 83 x 34 mm (L x W x H) – with terminals